07/24/2010
Insultaing mats for Electrical Purpose
CONFIRMING TO IS: 15652: 2006: CM/L 8385793
(SUPERSEDING IS 5424: 1969)
Application: Mats confirming to this standard are highly recommended in all kind of electric sub-stations, transformers rooms, lift machine rooms, switch rooms, electrical panels, AC plant rooms, X-ray plant rooms, LT/HT labs, around bus bars, generator rooms, etc. as a safeguard to the life of humen being due to any possible leakage.
Construction-Lining: Manufactured by appropriate vulcanized rubber compound free from any imuling leading to deterioration of insulating properties
Surface: Upper surface shall have small aberration to avoid kippry effets. Lower surface shall be plain or could be finished strip resistant.
Dimensions: Thickness : 2.00/2.50 mm.
: 3.00 mm
Length & Width : 1.00 Mtr. X 2.00 Mtr.
: 1.20 Mtr. X 2.40 Mtr.
*Continues length on request.
*Colors: - As per requirement.
Classes & maximum use of Voltage
Class
Thickness (mm)
Tolerance on
Thickness (%)
A.C. (R.M.S.)
(KV)
A
2.00
±10
3.3
B
2.50
±10
11
C
3.00
±10
33
D
3.50
±10
66