INSULATING MATS

FOR ELECTRICAL PURPOSES

·

Insulation Mat For Electrical Purpose IS:15652/2006

Application: Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. Poly Electro safe Mat are highly recommended for total safety of workmen from electrical shock when working in or around environment like-

• High Voltage Panels,
• Sub-station,
• Power Transformer Rooms,
• LT & HT Labs,
• Near Bus bars,
• Near Control Panels etc.

,

Construction: Insulating mat are made from Highly Electrical resistant Elastomer, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions:'

a)Sizes are 1mtr x 2mtr or long length.

b)Thickness as per classification & designation

Color:

Red 1 Blue I Green or any other without metal derivatives.

, I

PROOF VOLTAGE

Class

Voltage Systems

Thickness

A

Up to 3.3 KV

2.0 mm thick

B

Above 3.3 to 11 kV

2.5 mm thick

C

11 kV to 65 kV

3.0 mm thick

Working Temp: -10 to 55°C

Salient Features of the Mats:

1. Low Leakage Current 4. Low Temperature Resistant

2. Flame Retardant 5. Easy to install, can be posted

3 Insulation Resistant with water 6. Acid/Alkalis & Oil Resistant

Recommendation for Use of Mats:

1. All joints and covers shall be filled/covered with insulating materials of matching colors.

2. Contact with petrol/diesel/paraffin or white spirit-and strong acid/alkalis should be avoided.

3. Joints waterproofing compound should be used to protect insulating & electrical properties from moisture.

4. For obtaining max. Practical safety in adverse working conditions, the mat should be permanently pasted with the help of suitable adhesive/resin.

Other Range of Rubber Sheets:

Insertion Jointing Rubber Sheets (as per IS:638/1979)

(Used for leak proof jointing)

EPDM Rubber Sheets

Used for High Temperature and whether Resistance (Temp. -50°C to + 130°C)

Shot Blasting Rubber Sheets

. Highly Abrasion Resistant sheet

Neoprene Rubber Sheets I

Resistant to ageing, acid, heat, alkalies & cold mineral oils (Temp. -60°C to + 75°C)

Hypalon Rubber Sheets

Resistant to heat oils and chemicals (Temp. -25°C to + 130°C)

Nitrile Rubber Sheets .

Highly resistant to Oil & Solvent products (Temp. -20°C to + 100°C)

Elastomeric Bearing (Neoprene Bridge Bearing Pads)

As per IRC-83, (PT-II-1987)

Natural Rubber Sheets

Rubber Sheets For Gaskets Packing & Insertion (Temp. -6o°c to + 75°C)

Silicone Rubber Sheets

Used for high temp. Range (Temp. -6o°c to + 205°C)

Rubber Hoses

For Water, Air, Pneumatic, Welding, Rock-Drill, Sand-Blasting, Carbon Free, Brewery, Oil /Water Suction

PVC Water Stop Seal

PVC water stops are for use in concrete joints subjected to hydrostatic pressures. After being embedded in concrete, PVC water stops fill up the joints to form a continuous watertight diaphragm that prevents the passage of fluid.

Kindly Visit us at: http://www.santoshrubber.com

E-mail: s_rubber123@yahoo.com

Contact: 0-9891417740, 0-9810110578, 0120-2833692