Add your business to ZipLeaf for free!
 India Business Directory
Brass Rods International Standards

By Brass Extrusion Rods India

Brass Rods International Standards

12/31/2011 These high-quality brass rods are manufactured as per various national and international standards like :
Free Cutting Brass Rods
IS 319/89 - Grade I
IS 319/89 - Grade II
IS 319/89 - Grade III
BS 2874 - CZ 121 Pb3
UNS C36000
BS 2874 - CZ 131
CW 614 N EN 12164 : 1998


Forging Brass Rods
BS 218
IS - 6912/2005 FLB
Modified Forging Brass Rods as per IS - 8737
CW 617 N EN 12164 : 1998
CDA 377


High Tensile Brass Rods
IS 320/80
HT-1 is suitable for soldering.
HT-2 is suitable for machining.
BS 2874 - CZ 114
BS 2874 - CZ 115


Naval Brass Rods
IS 291/89 - Grade I
IS 291/89 - Grade II
CDA 464 and CDA 385


Lead Free Brass
70:30 Lead Free Brass and
65:35 Lead Free Brass Rods.
Table 2 of British Standard Specification for Brass Rods Name CZ-112
Naval Brass Rods(291/89) Grade I
CZ-113
Naval Brass Rods(291/89) Grade II
CZ-108
Lead free Riveting Brass Rods & Wires IS 4413/81
CZ-109
Lead free Riveting Brass Rods & Wires IS 4170/67
AS - 2738.2
AS - 486
Min Max Min Max Min Max Min Max Min Max Copper 61 64 59 62 62 65 59 62 59 62 Tin 1 1.5 0.5 1.0 - - - - 0.80 1.50 Lead - 0.2 0.5 1.0 - 0.30 - 0.30 1.0 2.50 Iron - 0.1 - 0.10 - 0.10 - 0.10 - - Aluminium - - - - - - - - - - Manganese - - - - - - - - - - Nickel - - - - - - - - - - Arsenic - - - - - - - - 0.02 0.25 Total Impurities - 0.20 - 0.20 - 0.60 - 0.30 - - Zinc Balance Balance Balance Balance Balance Table 4 of Brass Rods and Sections - BS - 2874 (BS 249/63) Name CZ 114
Brass Rods CZ 115
High Tensile
Brass Rods CZ 121
Free Cutting
Brass Rods CZ 122
(BS - 218)
Free Cutting
Brass Rods CS 124
Free Cutting Brass Rods
IS 319 cor II CZ 130
Leaded Brass For Section CZ 131
(DTD - 627)
Free Cutting Brass with Improved Ductility Min Max Min Max Min Max Min Max Min Max Min Max Min Max Copper 56 59 56 60 56 60 56.50 60 60 63 56 58 61 63 Lead 0.50 1.50 0.5 1.50 2.0 3.50 0.60 2.0 2.5 3.7 2.50 3.50 1.5 2.5 Iron 0.50 1.20 0.5 1.20 - - - 0.30 - 0.35 - - - - Aluminium - 1.50 - 0.20 - - - - - - - 0.40 - - Manganise 0.30 2.0 0.30 2.00 - - - - - - - - - - Tin (SN) 0.20 1.0 0.60 1.10 - - - - - - - - - - Zinc - Bal - Bal - Bal - Bal - Bal - Bal - Bal Nickel - - - - - - - - - - - - - - Silicon - - - - - - - - - - - - - - Total Impurities - 0.50 - 0.50 - 0.75 - 0.70 - 0.50 - 0.75 - 0.50 Name Free Cutting and Forging
Brass Rods
DIN EN 17660 MS - 58 Free Cutting and Forging
Brass Rods
DIN EN 12164 DIN 17660
2.0402 Free Cutting Forging Brass CW614N CW617N CW608N Min Max Min Max Min Max Min Max Min Max Min Max Copper 57 59 57 59 57 59 57 59 60 61 57 59 Lead 2.50 3.50 1.50 2.50 2.5 3.5 1.60 2.50 1.6 2.5 1.50 2.50 Tin - 0.40 - 0.30 - 0.30 - 0.30 - 0.20 - 0.30 Iron - 0.50 - 0.40 - 0.30 - 0.30 - 0.20 - 0.40 Aluminium - 0.10 - 0.10 - 0.05 - 0.05 - 0.05 - 0.10 Nickel - 0.50 - 0.40 - 0.30 - 0.30 - 0.30 - 0.40 Silicon - - - - - - - - - - - - Maganise - - - - - - - - - - - 0.20 Zinc Balance Balance Balance Balance Balance Balance Total Impurities - 0.20 - 0.20 - 0.20 - 0.20 - 0.20 - 0.20 Name BS - 218
Modified Forging
Brass IS 6912/85 FLB
Forging Brass
(with low Mn) High Tensile Brass Rods
As IS 320/80 Riveting Brass Wires (Leaded)
IS 2704/83 HT - 1 HT - 2 Min Max Min Max Min Max Min Max Min Max Copper 56.50 60.0 56.50 60.0 56 60 56 61 62 65 Lead 1.0 1.50 0.60 1.20 0.20 1.50 0.50 1.50 0.75 1.50 Tin - - - - 0.20 1.00 - 1.00 - - Iron - 0.30 - 0.30 0.20 1.25 0.20 1.50 - 0.10 Aluminium - - - - - 0.20 0.30 2.0 - - Manganise - 0.50 - 0.20 0.25 2.0 0.50 2.0 - - Nickel - - - - - - - - - - Silicon - - - - - - - - - - Zinc Balance Balance Balance Balance Balance Total Impurities - 0.50 - 0.25 - 0.50 - 0.50 - 0.50 Name JIS C 3601
(H 3250)
JIS C 3604
(H 3250)
JIS C 3771
(H 3250)
Min Max Min Max Min Max Copper 59.00 63.00 57.00 61.00 57.00 61.00 Tin - 0.20 - 0.20 - 0.30 Lead 1.80 3.50 1.80 3.50 0.50 2.50 Iron - 0.30 - 0.35 - 0.35 Aluminium - - - - - - Manganese - - - - - - Nickel - - - - - - Arsenic - - - - - - Zinc Balance Balance Balance Total Impurities - 0.50 - 0.50 - 0.50 Physical Properties Specification Size
(MM) Tensile Strength (Kg / mm2 )
Min % of Elongation 5.65
Min 0.2% Proof Stress Hardness
HV IZOD
Impact Value
(Kg/FM) HT-1 IS 320/80 - 49 12 - - - HT-2 IS 320/80 - 53 12 - - - DIN EN 17660
MS 58
(Forging) - 37 20 - - - BS 218
Modified
Forging Brass - 40 18 - - 2.2 DIN EN 17660
MS 58
(Free Cutting) - 43 15 - - - Riveting Brass Wire (Leaded)
IS 2704/83 ¼ Hard (HA)
½ Hard (HB)
Hard (HD)
Extra Hard (HE) 325 Mpa
400 Mpa
500 Mpa
695 Mpa 30
20
15
5 - 110 to 130
131 to 150
151 to 175
176 to 215 - DIN EN 12164 CW 614N - 43 10 - - - DIN EN 12164 CW 617N - 43 10 - - - DIN EN 12164 CW 608N - 40 25 - - - C 3601 JIS Annealed
½ Hard
Hard 294 Mpa
343 Mpa
451 Mpa 25
25
25 - - - C 3604 JIS - 333 Mpa 20 - - - C-3771 JIS - 314 Mpa 15 - - - CZ-112
Naval Brass Gr-1 Upto 12.50
12.50 to 50
50 to 100 40
38.50
35 18
18
18 - - - CZ-113
Naval Brass Gr-2 All Size 40 15 - - - CZ-109
Lead Free - 34 25 - - - CZ-108
Lead Free Annealed
Half Hard
Hard 33
47 to 63
63 to 79 35
35
35 - - - CZ-114 Hard 47
55 18
12 24.5
29.5 - - CZ-115 - 47 20 19.50 - - CZ-121 Annealed 6 to 25
Annealed 25 to 50
Annealed 50 above
Half Hard 6 to 12
Half Hard 12 to 25
Half Hard 25 to 50
Half Hard 50 above
Hard 6 to 12
Hard 12 to 25 345 Mpa
315 Mpa
285 Mpa
405 Mpa
395 Mpa
355 Mpa
325 Mpa
550 Mpa
490 Mpa 12
17
22
4
6
12
17
-
4 - - - CZ-122 - 310 Mpa 20 - - - CZ-124 6 to 12
12 to 25
25 to 50
50 above 41
40
36
33 4
6
12
17 - - - CZ-130 - 37 25 - - - CZ-131 - 37 22 - - -

About This Author

Brass Extrusion Rods India

We HTE (Hitech Extrusion LLP) are a leading manufacturer and exporter of Brass Extrusion Rods, having experience of more than three decades in Brass industry. We manufacture Brass Rods, Brass Wires, Bronze Rods, Brass Casting, Brass Pipes Tubes, Brass Hollow Rods, Brass Ingots Billets, Special Coppe…

Read More »

More Articles From This Author

Tin Bronze Ingots and Billets

Tin Bronze Ingots and Billets

12/31/2011 Standard Nearest ISO Designation International Equivalent Chemical Composition by Wt. % Conditions Cu% Sn% P% Pb% Zn% Others BS 1400 PB1 CuSn10P IS 28, DIN 1705 ISO 1338 ASTM B505 Rem 11 - 15.5 0.5 - 1.0 0.25 max 0.05 max Fe-0.10max Total Imp 0.60% max Unwrought... Read More »

Phosphorus Bronze Ingots and Billets

Phosphorus Bronze  Ingots and Billets

12/31/2011 Phosphorus Bronze Grade B.S. 1400: 1985 Nominal Composition 2% PSN/mm Min Tensile StrengthN/mm Min Elongation % Min BrinellHardness Min PB1 89/10/01 130 250 5 60 PB1 88/12 140 260 7 80 PB1 90/10 130 250 5 60 PB1 90.5/9.5 130 2... Read More »

Leaded Bronze Ingots and Billets

Leaded Bronze Ingots and Billets

12/31/2011 Leaded Bronze Grade B.S. 1400: 1985 Nominal Composition 2% PSN/mm Min Tensile StrengthN/mm Min Elongation % Min BrinellHardness Min LPB-1 76/9/0/15 LB2 80/10/0/10 80 180 8 60 LB3/LBC3 85/10/0/5 100 195 10 65 LB4 85/5/0/10 60... Read More »

Aluminium Bronze Ingots and Billets

Aluminium Bronze Ingots and Billets

12/31/2011 Aluminium Bronze Grade B.S. 1400: 1985 Nominal Composition 2% PSN/mm Min Tensile StrengthN/mm Min Elongation % Min BrinellHardness Min AB1 89/9/2 180 500 18 100 AB2 85/9/4/5 250 600 13 140 ALBC2 84/9/4/5 490 20 120 ALBC3 82... Read More »

Gunmetal ingots and billets

Gunmetal ingots and billets

12/31/2011 Gunmetal Grade B.S. 1400: 1985 Nominal Composition 2% PSN/mm Min Tensile StrengthN/mm Min Elongation % Min BrinellHardness Min G1/BC3 88/10/2 245 15 G1/BC2 88/8/4 245 20 LG1 88/3/9/5 85 180 15 60 LG2 85/5/5/5 90 200 13 60... Read More »

Copper Strips

Copper Strips

12/31/2011 Copper Strips are the essential products of copper which have numerous domestic and industrial uses. The two types of copper strips include enclosed copper strips and Bare Copper Strips. Bare Copper Strips. Each of them has it own specific uses. The Adhesive Copper Strip contains translucent coverin... Read More »

Copper Busbars

Copper Busbars

12/31/2011 We have large production facilities for Extruded and Drawn Flats in various production range of sizes and shapes for Electrical Engineering (Transformers, Switchgears, Panels, Earthing, Electrification - Lines), Anodes, Components etc.Width : 19 mm to 260 mm Thickness : 3 mm & above W... Read More »

Copper Earthing taps

Copper Earthing taps

12/31/2011 We manufacture various types of Copper Alloy Extrusions and Brass Extrusions, which includes Copper/Brass Rod, Ingot, Billet, Various Profiles & Sections in conformation to different standards like IS, BS, DIN, ASTM, etc. These Free Cutting Rods finds application in the manufacturing of various... Read More »

Copper Profiles Sections

Copper Profiles Sections

12/31/2011 Besides our wide range of products, we also develop the profiles as per customer’s requirementsApplications: Automobiles and Railways Wide range of uses in Electrical Industry, e.g. Switchgears, Earthing Rods etc. Transformers and Circuit Breaker Terminals Electrical Holders and Clamps... Read More »

Copper Rods

Copper Rods

12/31/2011 Copper Rod CDA 101 ofhc CDA 110 etp Round, Hex, Square Copper Bus Bar Silver Plated Tin Plated Various Edges Large Bar Sizes In Stock Now Bars and Rods Cut to Length Copper Sheet and Plate CDA 101 ofhc CDA 110 etp Various Sizes and Tempers Copper Coil CDA 110 &fra... Read More »

Brass Tubes For Agriculture Equipments

Brass Tubes For Agriculture Equipments

12/31/2011 Product application Areas :Hand Pumps, Bore Hole Tubes Characteristics :A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excelle... Read More »

Brass Tubes For Sanitary Fittings & Accessories

Brass Tubes For Sanitary Fittings & Accessories

12/31/2011 Product application Areas :Plumbing Characteristics :A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working pro... Read More »

Aluminium Brass Tubes

Aluminium Brass Tubes

12/31/2011 STANDARD:BS, ASTM, DIN, NFA, JIS, IS Product Application Area :Power Plants, Desalination Plants, Ship Building & Ship Repair, Heat Exchangers and Radiators, Refineries, Offshore Oil rigs, Condensers, Evaporators, Ferrules, Distillers. Characteristics :A Copper Zinc Alloy containing Alum... Read More »

Admiralty Brass Tubes For Evaporators & Coolers

Admiralty Brass Tubes For Evaporators & Coolers

12/31/2011 Product Application Areas :Heat Exchangers, Refineries, Power Plants, Desalination Plants, Ship Building & Ship Repairs, Condensers, Ferrules, Distillers. Characteristic :A Copper Zinc Alloy containing tin and small amount of Arsenic, which is added as an inhibitor against dezincification. The p... Read More »

Arsenic Brass Tubes For Sugar Industries

Arsenic Brass Tubes For Sugar Industries

12/31/2011 Product application Areas :Sugar Industry Characteristics :A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold... Read More »

Bras Tubes For General Engineering Purpose

Bras Tubes For General Engineering Purpose

12/31/2011 Product application Areas :General Engineering, Ammunition Characteristics :A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent c... Read More »

Brass Tubes For Furniture and lighting fixtures

Brass Tubes For Furniture and lighting fixtures

12/31/2011 Product application Areas :Furniture, Architectural Grill Work Characteristics :A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever... Read More »

Brass Pipes Tubes

Brass Pipes Tubes

12/31/2011 Applications : Components Production Interior Design Architectural Applications Modern Art Furnishing and Lamps Pumps Gunwales Plumbing Heat Exchangers Vehicles Musical Instruments Spray Equipment Alloys : ASTM B135 (C 27200) DIN 17660/17671/1755 (CuZn37) Architectu... Read More »

Brass Ingots

Brass Ingots

12/31/2011 The brass ingots and manufactured in our factories have good fluidity, high strength, wonderful pressure tightness, wearing quality, sound corrosion resistance, acid fastness, machinability. They are used in valves, pumps, impellers, supply-water faucets, bearings, sleeves, pressure seal cas... Read More »

Brass Billets

Brass Billets

12/31/2011 The brass Billets and manufactured in our factories have good fluidity, high strength, wonderful pressure tightness, wearing quality, sound corrosion resistance, acid fastness, machinability. They are used in valves, pumps, impellers, supply-water faucets, bearings, sleeves, pressure seal ca... Read More »

Brass Flat Bars

Brass Flat Bars

12/31/2011 We are well known entity in the business of manufacturing top class Brass Flat Bar. Our brass flat bar are durable and available in all sizes and lengths. Furthermore, we are well distinguished exporter of superior quality Brass Flat Bar.Offers the following types of flat bars Standard flat bar w... Read More »

Brass Strips

Brass Strips

12/31/2011 Brass Strip Manufacturers, Exporters, Importers, and Suppliers in the domain. The Brass Strips offered by the company are highly durable and provide unbeatable performance. For the convenience of the clients, we are providing our Brass Strips in different sizes and dimensions. Why Our Brass S... Read More »

Brass Profiles and Sections

Brass Profiles and Sections

12/31/2011 We specialize in copper alloys extrusion of various sizes. In addition to basic shapes like round, square, & hex; we also manufacture a host of other specialized ranging from 2.5 mm to 80 mm and any Section as per customized requirement. A comprehensive list of the products manufactured by us is... Read More »

Brass Hollow Rods

Brass Hollow Rods

12/31/2011 Brass Hollow Rods manufactured by the company. As leading manufacturers of Brass Hollow Rods, our aim is to provide equipment that meets all international standards.You can find our brass rods which conform to different international standards as required by you and have now forayed into the manufac... Read More »

Brass Wire Nickel silver wise for ball pen Tips

Brass Wire Nickel silver wise for ball pen Tips

12/31/2011 The entire range of Brass Wire for Leaded Ball Pen Tip is manufactured using finest quality of brass procured from reliable and certified sources of the market. These wires are valued for their resistivity against thermal conductivity, longer operational life, low maintenance and strength. We also s... Read More »

Brass EDM Wires

Brass EDM Wires

12/31/2011 ALLOY CU% Zn% Ni% Sn% P% Si% Mn% TotalImpurities 95/5 Brass 94 - 96 Bal - - - - - 0.01 - 0.4 90/10 Brass 89 - 91 Bal - - - - - 0.40 (Max.) 85/15 Brass 84 - 86 Bal - - - - - 0.40 (Max.) 80/20 Brass 79 - 81 Bal - - - - - 0.40 (M... Read More »

Leaded Brass Wires

Leaded Brass Wires

12/31/2011 Manufacturing size range of brass wires Round 1,75 - 15 mm* Hexagonal /Octagonal 2,5 - 13 mm* Square 2,5 - 13 mm* * The minimum and maximum values vary according to the type of alloy. EN DesignationPacking typeFrom 30 kg to 1500kDimension range (mm) MI... Read More »

Brass Cold Heading Wire

Brass Cold Heading Wire

12/31/2011 Non Ferrous Alloys Brass 220 226 230 260 270 274 353 360 Copper 101 102 104 107 ETP 110 Silicon Bronze 651 655 Nickel Silver 752 757 760 Phos Bronze 507 510 Capabilities Round Diameters: .006” – 1.00”... Read More »

Brass Lead Free Wires

Brass Lead Free Wires

12/31/2011 We are the manufacturer and exporter of a wide range of wires, which can be used in diverse industries. These are available under technical features and can be customized as per the requirement of the industry usage. We offer our products at very effective prices.is a principal supplier to v... Read More »

Knurled Extrusion Rods

Knurled  Extrusion Rods

12/31/2011 We manufacture Brass Extruded Rods, Profiles, Section and Hallows for quality conscious manufacturers of Brass components engaged in industries like Engineering, Electrical, Electronics, Automobiles, Building Hardware, Sanitaryware etc.... Read More »

Flat Extrusion Bar

Flat Extrusion Bar

12/31/2011 Minimum Thickness Minimum Width Maximum Width 1.60 6.35 127.0 Minimum Thickness Minimum Width Maximum Width 50.80 76.20 127.0... Read More »

Brass Hexagonal Rods

Brass Hexagonal Rods

12/31/2011 Width Across Flats Tolerance - Minus Only Over(mm) Up to incl.(mm) Normal Plus & minus(mm) Plus Nil - Minus(mm) 4.0 10.0 0.10 0.08 10.0 20.0 0.20 0.10 20.0 30.0 0.25 0.13 30.0 40.0 0.30 0.15 40.0 50.0 0.40 0.... Read More »

Square Extruded Rods

Square Extruded Rods

12/31/2011 Brass Square Extrusion Bar manufactured and exported. We aim at satisfying all types of customer demands by supplying them brass square bar in the size and shape desired by them. Extensive stock of Brass Square Bar and fittings are also available for immediate delivery and package supply as per the... Read More »

Round Extrusion Rods

Round Extrusion Rods

12/31/2011 Round Extrusion Rods Bar manufactured and exported. We aim at satisfying all types of customer demands by supplying them brass round bar in the size and shape desired by them. Extensive stock of Brass Round Bar and fittings are also available for immediate delivery and package supply as per the need... Read More »